1. Reduce the oxygen pressure
Oxygen in the cutting process is combustion-supporting, drilling pressure is too high, the plate will be an instant break, resulting in deflagration. Reduce the blowing pressure, punching will slow breakdown plate, will not cause deflagration.
2. Use air cutting
Cutting with air will improve the phenomenon of blasting, but the cutting speed will be reduced. Of course, you can also use nitrogen and other inert gas, but the gas costs will be higher.
3. Adjust the focus
Focus adjustment to solve the blasting hole is more complex, we need to cut the sample, step by step debugging, so focus on cutting the surface of the plate. If you cut thick plate, will cut the beauty of the lower.