BR DTH Hammer

Product Details

BULROC DTH Hammer
BR DTH Hammer

DOWN THE HOLE DRILLING HAMMERS   

DTH hammer is used for drilling holes through a wide range of rock types, the variety of which continues to extend well beyond the original conception of early blast hole drilling.

Down-the-Hole refers to where the hammer action occurs when compared to drifter hammers, which hammer on top of the drill string. The DTH hammer piston always makes direct contact with the drill bit and there is generally no loss of transmitted energy as the hammer drills deeper, as is the case with drifter (top hammer) rigs.

Roschen offers a wide range of DTH hammers suitable for a variety of drilling operations. Our Down the Hole hammers provide the most versatile and cost effective rock drilling method.

DTH drilling tool is a kind of drilling system which uses compressed air as motivation, makes drilling impact motivation parts down the hole, to control the piston reciprocating motion by the distribution device in the hammer, and then impacts the DTH bit in the front of the hammer to transit the impacting power to the bit. The DTH bit in the front of the hammer breaks the rock to drill hole.

At present, DTH drilling tool is widely used in underground mining, quarries, hydraulic and Hydro-Power Engineering, water well drilling, Mineral exploration, anchoring hole drilling, geothermal engineering, Subway excavation, another civil engineering. it has the advantage of high flatness, smooth hole wall, high rigid of drill rod and hammer, independent of high axial thrust, no limit of drilling depth, low cost of devices and easiness to maintain. At the drilling hole of diameter 105 mm to diameter 254 mm, a plenty of the DTH drilling tools are used. 

The Roschen range of ROS down the hole hammers are strong and robust tools of a simple and straight forward design to provide maximum performance, with a minimum of maintenance.

 

Please Note:

That, contrary to other ROSCHEN hammer models, the ROS series do use bits with Footvalves. 

ROSCHEN ROS hammers are supplied as standard with a Check Valve arrangement which is designed to maintain the pressure inside the hammer when the air is switched off and so help prevent contaminated

water from entering the hammer.

ROSCHEN ROS hammers are designed to give optimum performance with the minimum consumption of compressed air. If, however, particular deep-hole application require extra air flushing. This can be

achieved by drilling through the soft alloy plug in the piston.

                    

Advantages:

1. Valveless air distribution. More reliable.

2. Simple design of the piston. Long life.

3. More efficient energy transfer, fact drilling speed, lower air consumption and lower oil consumption.

4. Fewer internal parts, simple structure, long life, less failure and easier to maintain because all the parts are heat treated.

5. Easy to disassemble because the top sub, the drive chuck and the external cylinder are connected by multi-step thread.

ROSCHEN DTH Hammers Specifications

Hammer Size

Bit Shank

ROSCHEN Code

Connection Thread

Suitable bit

Working pressure

Air consumption

2"

BR2

ROS 11                 ROS 22

RD50 box

¢70-¢90mm

0.7-1.75Mpa

0.7Mpa

4.5m3/min

1.0Mpa

4m3/min

1.4Mpa

5m3/min

3"

DHD3.5

ROS 32

API 2 3/8" Reg

¢90-¢110mm

1.0-1.5Mpa

1.0Mpa

4.5m3/min

COP32/COP34

M30

1.5Mpa

9m3/min

4"

DHD340

ROS 34

API 2 3/8" Reg

¢110-¢135mm

1.0-2.5Mpa

1.0Mpa

6m3/min

COP44

QL40

SD4

1.8Mpa

10m3/min

M40

2.4Mpa

15m3/min

5"

DHD350

ROS 52               ROS 54

API 2 3/8"Reg/API 3 1/2" Reg

¢135-¢155mm

1.0-2.5Mpa

1.0Mpa

9m3/min

COP54

QL50

SD5

1.8Mpa

15m3/min

M50

2.4Mpa

23m3/min

6"

DHD360

ROS 62              ROS 64

API 3 1/2" Reg

¢155-¢190mm

1.0-2.5Mpa

1.0Mpa

10m3/min

COP64

QL60

SD6

1.8Mpa

20m3/min

M60

2.4Mpa

28.5m3/min

8"

DHD380

ROS 82              ROS 84

API 4 1/2" Reg

¢195-¢254mm

1.0-2.5Mpa

1.0Mpa

15m3/min

COP84

QL80

1.8Mpa

26m3/min

SD8

2.4Mpa

34m3/min

10"

SD10

ROS 100

API 6 5/8" Reg

¢254-¢311mm

1.0-2.5Mpa

1.0Mpa

22m3/min

Numa100

1.8Mpa

40m3/min

ROS 100

2.4Mpa

55m3/min

12"

DHD1120

ROS 120

API 6 5/8" Reg

¢305-¢445mm

1.0-2.5Mpa

1.0Mpa

30m3/min

SD12

1.8Mpa

56m3/min

Numa120

2.4Mpa

78m3/min

Notes: Metzke, Remet thread is available!


FAQ

1. Methods of Payment:

T/T (Telegraphic Transfer) or Western Union or L/C at sight

2. Handling time for an order

Only 2 or 3 days if we have stock on your request size.

Based on order quantity, normally it takes 25 days for production.

3. Shipping way

Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air

Bulk order: we suggest by air or by sea.

4. Quality Control

We have our own experienced QC.

There will be strict inspection and testing for every order before shipping out.

5. After Services:

(1). Our sales team will response for your question within 24 hours (Holidays Excluded)

(2). Technical Support will be available in any time

(3). Free replacement will provide once the failure confirmed caused by our product quality

6.How can we trust your company?

We support Alibaba trade insurance. Protecting products quality, shipment on time and your covered amount.

Any other questions,please feel free to contact with me online or by phone.



ROSCHEN GROUP is professional in manufacturing and supplying quality br dth hammer as one of the leading manufacturers and suppliers in China. We now bring you high quality br dth hammer for sale, competitive in its excellent performance and high precision. Please rest assured to buy.
Feedback