Steel Body PDC Drill Bit

Product Details

 

Steel Body PDC Drill bits

Steel PDC
Steel Body PDC has a number of advantages with their compact malleable steel unibody construction.
1. Reduced makeup length for improved build rates and directional response
2. Maximum face volume and junk slot area combined with optimized nozzle placement clear cuttings efficiently in long laterals or low flow.
3. Updrill cutters for improved side cutting and additional gauge protection.
4. Proprietary tungsten carbide spray metal technology for maximum erosion resistance and superior toughness in demanding applications.
5. Sintered carbide nozzle bore sleeves prevent internal erosion.
6. Domed inserts for reduced vibration and improved toolface control.
7. The latest in PDC cutter technology for superior abrasion and impact properties.  
Polycrystalline diamond compact (PDC) bits were first introduced into the oil industry in the mid 70's. Since then, numerous technological design changes have been implemented that have made them an extremely effective tool when drilling in
certain formations, most typically homogenous sedimentary rock formations including sandstone, shale, dolomite, and limestone. PDC bits use a shearing or shaving action when encountering the formation. These bits are normally used at higher rotation speeds than typical rotary bits. 
The hydraulics of PDC bits are designed to keep the hole clean and the bit cool, which in turn increases the ROP and longevity of the bit.  
ROSCHEN offers a wide range of PDC bits in sizes up to 24".  All PDC bits are fully customizable to meet specific drilling requirements, depending on the formation being drilled and the equipment being used.  
Explore the subcategories below, view our online Drill Bits catalog, or contact your ROSCHEN representative for detailed bit specifications, assistance selecting the correct bit for your specific application, or to learn more about our complete Drill Bit product offering. 


Body: 

Steel body PDC bits are a lower cost alternative, to matrix body bits. They are generally preferred in soft formations, such as sandstone.Matrix body PDC bits provide excellent resistance to wear. They are commonly used in harder more abrasive formations such as limestone and dolomite. 


Number of Blades: 

The number of blades on a PDC bit is largely determined by the formation being drilled. Generally higher blade and cutter counts are used for harder formations, whereas in softer formations fewer blades can be used to increase ROP. Gauge protections is applied to all bit blades to insure longevity and to sustain a straighter hole which increases ROP. 


Cutter Characteristics (count and size): 

Cutter count and size can be adjusted for drilling in specific formations. Small cutters and high cutter count are chosen for hard and abrasive rock formations, whereas large cutters and a reduced cutter count are preferred for soft to medium formations.   


Hydraulics:  

PDC bits are available with flushing holes or open center and either fixed or adjustable nozzles. Options are available for all varieties of PDC bits and are designed specific to those PDC bits to maximize bit performance and longevity.   

PDC Drill Bit Specifications

Size

Type

PDC Diameter

Thread Type

3 1/2"

Plugbuster

13mm

2 3/8" PAC

3 3/4"

Plugbuster

13mm

2 3/8" API REG

3 7/8"

Plugbuster

13mm

2 3/8" API REG

4 1/4"

Plugbuster

13mm

2 3/8" API REG

4 1/2"

Plugbuster

13mm

2 3/8" API REG

4 5/8"

Plugbuster

13mm

2 7/8" API REG

4 3/4"

Plugbuster

13mm

2 7/8" API REG

3 7/8"

3 Blades

13mm

2 3/8" API REG

3 7/8"

Flat Face

13mm

2 3/8" API REG

4 1/4"

Flat Face

13mm

2 3/8" API REG

4 1/2"

Flat Face

13mm

2 3/8" API REG

4 3/4"

Flat Face

13mm

2 7/8" API REG

4 3/4"

3 Blades

13mm

2 7/8" API REG

4 7/8"

Flat Face

13mm

2 7/8" API REG

5"

Flat Face

13mm

2 7/8" API REG

5 1/8"

Flat Face

13mm

2 7/8" API REG

5 1/2"

Flat Face

13mm

2 7/8" API REG

5 1/2"

3 Blades

13mm

2 7/8" API REG

5 5/8"

Flat Face

13mm

2 7/8" API REG

5 5/8"

3 Blades

13mm

2 7/8" API REG

5 5/8"

3 Blades

13mm

3 1/2" API REG

5 7/8"

Flat Face

13mm

3 1/2" API REG

5 7/8"

5 Blades

13mm

3 1/2" API REG

6"

5 Blades

13mm

3 1/2" API REG

6 1/8"

5 Blades

13mm

3 1/2" API REG

6 1/4"

5 Blades

13mm

3 1/2" API REG

6 1/2"

5 Blades

13mm

3 1/2" API REG

6 3/4"

5 Blades

13mm

3 1/2" API REG

7 7/8"

5 Blades

13mm~16mm

4 1/2" API REG

7 7/8"

6 Blades

13mm~16mm

4 1/2" API REG

8 1/2"

5 Blades

13mm~16mm

4 1/2" API REG

8 1/2"

6 Blades

13mm~16mm

4 1/2" API REG

8 3/4"

5 Blades

13mm~16mm

4 1/2" API REG

8 3/4"

6 Blades

13mm~16mm

4 1/2" API REG

9 7/8"

6 Blades

16mm

6 5/8" API REG

11"

6 Blades

16mm

6 5/8" API REG

12 1/4"

6 Blades

16mm

6 5/8" API REG


FAQ
Q: Are you a manufacturer or trading company?
A: We are a specialized manufacturer.
Q: What are your main products, and used for?
A: Our products include core bit, PDC bit, reaming shell, core barrel, casing, drill rod, SPT equipment, Shelby sampler, drill rig and other drilling parts.
They are used for mineral exploration, geological drilling, geotechnical engineering and soil sampling.
Q: How about the delivery terms?
1. Payment: T/T, L/C, Western Union, Paypal, 30% deposit in advance and rest before delivery.
2. Min. order quantity: 1 piece.
3. Transportation: By DHL/TNT/Fedex express, air, sea, train.
Q: How about discount?
A: Price is based on products and order quantity.
Q: Do you accept sample order?
A: Yes sure, please contact us for details.
Q: How about your after-sales service?
A: As a manufacturer, we offer promt technology support for all problems and questions. Besides, we accept goods return or replace for quality problem.
Q: How does your company control the quality?
A: Quality first. In order to guarantee high quality for our products, Roschen always makes a serious inspection for all products and raw materials in strict procedure. We have obtained certificate of ISO9001:2000 in 2004.


For more information please contact: 
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
Skype: ROSCHEN.TOOL , ROSCHEN_GROUP
WeChat: +86-137 6419 5009 ; +86-135 8585 5390
WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390
Email: roschen@roschen.com ; roschen@roschen.net
Website: http://www.roschen.net ; http://www.roschen.cn

ROSCHEN GROUP is professional in manufacturing and supplying quality steel body pdc drill bit as one of the leading manufacturers and suppliers in China. We now bring you high quality steel body pdc drill bit for sale, competitive in its excellent performance and high precision. Please rest assured to buy.

Feedback